The custom threshold property is used to create color zone on the gauge.
There are 3 mode :

  • Unique
  • Range
  • Custom

Unique

Unique mode is made to get a single threshold value. it can be configured with a direction that define the zone in green or in red :

Direction Below color Above color
Low is good Green Red
High is good Red Green

Range

Range mode is working similar to the threshold but instead of having a single point, it is possible to define a zone with a minimum and a maximum.
It is possible to define only the start of the end of the zone. The direction is also configurable :

Direction Inside color Outside color
Inside is good Green Red
Outside is good Red Green

Custom

The custom mode is the most flexible available for the gauge. It is possible to define up to 10 color zone.
The zones can be configured with min & max value or with a percentage (of the gauge minimum and maximum)

Value based

Value based mode allows to configure each zone with a start and end value

Percentage based

Percentage based mode allow to configure each zone with a percentage of the gauge

Last modified: Apr 18, 2023

Feedback

Was this helpful?

Yes No
You indicated this topic was not helpful to you ...
Could you please leave a comment telling us why? Thank you!
Thanks for your feedback.

Post your comment on this topic.

Post Comment